Home

We hold stock of all our “specialised” Aluminium Sections coated white and in mill finish and we can offer keen turn-around times for specific colours and finishes such as Anodising.

Effjey a large Aluminium stockist, based in London and have the ability to supply you with all your Aluminium needs!

General Information On Aluminium

Aluminium is a silver-white metal, very light in weight (less than three times as dense as water), yet relatively strong. In addition, aluminium is ductile, that is, it can be drawn into wires or pressed into sheets or foil. It is the most abundant metallic element, and the third most abundant of all elements in the Earth’s crust, making up 8% of the crust by weight.

The name aluminium was derived from alumen, the Latin name for alum (an aluminium sulfate mineral). The metal was called aluminium with the -ium ending being the accepted ending for most elements at this time. This usage persists in most of the world except the United States, where the last i has been dropped from the name.

About 85% of all the bauxite mined worldwide is used to produce alumina for refining into aluminium metal. Another 10% produces alumina which is used in chemical, abrasive, and refractory products. The remaining 5% of bauxite is used to make abrasives, refractory materials, and aluminium compounds.

The lightness, strength, and corrosion resistance of aluminium are important considerations in its application. Metallic aluminium is used in transportation, packaging such as beverage cans, building construction, electrical applications, and other products.

F12

STOP END FOR 12mm PANEL. USED FOR TOP TRIM

Aluminium Sections

C12

SECTION FOR 12mm PANELS. USED FOR HORIZONTAL AND VERTICAL JOINTS TO WALL PANELLING

Aluminium Sections

A12

STOP END FOR 12mm PANEL. USED FOR SALES FLOOR PANELLING AND BOTTOM TRIM

E12

12mm EXTERNAL CORNER AND COLUMNS SECTION

B12

STOP END FOR 12mm PANELS. USED FOR SALES FLOOR PANELLING, FINISH TO WINDOW REVEALS, INTERNAL CORNERS, COLUMNS ETC

135^o ANGLE

22 x 22 x 2mm ANGLE

LIGHT ANGLE

25.4 x 19 x 2.54mm ANGLE

HEAVY ANGLE

31.75 x 25.4 x 4.76mm ANGLE




Home About Effjey Aluminium Sections Powder Coating Engineering Shopfitting MDF & Chipboard Joinery Warehousing & Distribution End Users Contact		We supply a range of specialised and “off the shelf” wall board section. We hold stock of all our “specialised” Aluminium Sections coated white and in mill finish and we can offer keen turn-around times for specific colours and finishes such as Anodising. Effjey a large Aluminium stockist, based in London and have the ability to supply you with all your Aluminium needs! Another of our "top-sellers" is the Galvanised Sections. General Information On Aluminium Aluminium is a silver-white metal, very light in weight (less than three times as dense as water), yet relatively strong. In addition, aluminium is ductile, that is, it can be drawn into wires or pressed into sheets or foil. It is the most abundant metallic element, and the third most abundant of all elements in the Earth’s crust, making up 8% of the crust by weight. The name aluminium was derived from alumen, the Latin name for alum (an aluminium sulfate mineral). The metal was called aluminium with the -ium ending being the accepted ending for most elements at this time. This usage persists in most of the world except the United States, where the last i has been dropped from the name. About 85% of all the bauxite mined worldwide is used to produce alumina for refining into aluminium metal. Another 10% produces alumina which is used in chemical, abrasive, and refractory products. The remaining 5% of bauxite is used to make abrasives, refractory materials, and aluminium compounds. The lightness, strength, and corrosion resistance of aluminium are important considerations in its application. Metallic aluminium is used in transportation, packaging such as beverage cans, building construction, electrical applications, and other products. F12 STOP END FOR 12mm PANEL. USED FOR TOP TRIM Aluminium Sections C12 SECTION FOR 12mm PANELS. USED FOR HORIZONTAL AND VERTICAL JOINTS TO WALL PANELLING Aluminium Sections A12 STOP END FOR 12mm PANEL. USED FOR SALES FLOOR PANELLING AND BOTTOM TRIM E12 12mm EXTERNAL CORNER AND COLUMNS SECTION B12 STOP END FOR 12mm PANELS. USED FOR SALES FLOOR PANELLING, FINISH TO WINDOW REVEALS, INTERNAL CORNERS, COLUMNS ETC 135^o ANGLE 22 x 22 x 2mm ANGLE LIGHT ANGLE 25.4 x 19 x 2.54mm ANGLE HEAVY ANGLE 31.75 x 25.4 x 4.76mm ANGLE
	Design By DIGITAL CREATION UK MEDIA